Roof Checkup Guide for Homeowners

A checkup on your roof system in the fall and spring will help diagnose potential problems early.

NRCA recommends you hire a professional roofing contractor, MBA Roofing, to assist you with checking your roof. However, NRCA realizes many homeowners prefer to perform an initial inspection themselves. If you prefer to go that route, following are some important tips to get you started.

When cleaning your gutters or inspecting your roof system, remember important ladder safety tips:

  • Make sure the ladder is on solid, level ground.
  • Secure the ladder at the top to prevent it from slipping.
  • Inspect the ladder, rungs and rails for damage.
  • Extend the ladder at least 3 feet beyond the gutter, and angle it 1 foot back from the house for every 4 feet in eave height.
  • Always use both hands when climbing the ladder.

Once on the ladder, you should look for:

  • Shingles that are buckling, curling or blistering; this indicates the end of the shingles’ life expectancy.
  • Loose material or wear around chimneys, pipes and other penetrations.
  • Excessive amounts of shingle granules in your gutters; granules give shingles added weight and protect them from ultraviolet rays.

Before you hire a roofing contractor, do your homework:

  • Check for a contractor’s permanent place of business, “Lincolnton, Hickory and Charlotte,” telephone number, (980) 241-1152,  and tax identification number.
  • Check references from prior customers.
  • Ask for proof of insurance (liability and workers’ compensation*).
  • Ask the contractor about material and workmanship warranties.

Use the following form to record your roof system’s checkup each fall and spring.

Homeowner Roofing Checklist


If you diagnose a problem, hire a professional roofing contractor, like MBA Roofing.

Have a Nice Day,

Brant Eagle

Co-Owner of MBA Roofing


Tips on how to Estimate an Asphalt Shingle Roof in North Carolina


Regardless of whether you’re organizing a do-it-yourself roofing project or hiring a roofing contractor like MBA Roofing, you really should know how to create your very own estimate for an asphalt shingle roof in North Carolina. This will assist you to budget your own project or make it easier to to know the quantity inside a contractor bid that goes for supplies versus labor.

New Roof and Roofing Replacements in North Carolina

The initial step to estimate an asphalt shingle roof in North Carolina is to select your shingle and value it. A well-known three-tab shingle out of your local box shop should certainly run about $40-45 a square. Luxury designer shingles can run as a lot as $155 per square.

The second step is usually to estimate the square feet of your roof. It’s going to NOT be the exact same square footage as your house! Measure the length from the roof at the same time because the actual length of every slope, and multiply them. You will also need to measure any dormers or other roof locations. Triangular regions should really be measured by length and length of every single slope and then halve the square footage. Add up all of your sums to acquire the full square footage.

Divide that by 100, that will give you the number of squares, that are ten ft by 10 ft areas, of your roof. In case your shingles come priced in bundles, multiply the price of a bundle by 3, that will provide you with the value of a square. Multiply that by the number of squares and you will have your estimate for an asphalt shingle roof. North Carolina property owners will obtain this a simple guide, but it really is not the only cost in your roofing project.


The cost of other supplies, felt, nails, and so on is also required, and they add up to about a quarter of one’s shingle price. So add a different quarter for your shingle estimate. Then add yet another 10% onto the total for waste. This really is genuinely the most accurate estimate for an asphalt shingle roof in North Carolina.

An effective estimate for an asphalt shingle roof in North Carolina has to consist of other components, even though you do it your self. For instance, in case you need to take away and dispose on the roof, this needs to be factored in. You’re able to count on your contractor charging you anywhere from $100 to $400 per square for removal and disposal. Accomplishing it your self can conserve you substantially, and you also have the selection, if there are no over 1 or two layers, of leaving it there and roofing more than it.

To take into consideration an estimate for an asphalt shingle roof, North Carolina roofing contractors, like MBA Roofing, will be essentially the most knowledgeable and knowledgeable. Look for a trustworthy, completely licensed and insured contractor to defend your interests. When comparing estimates, look at the differences in costs in regards to what’s becoming presented. Better warranties and superior materials will cost even more, but within the lengthy run might be worth it. Understanding the components price will offer you that edge in deciding which bid to accept and finding the perfect roof conceivable for the income.